Help! Volkswagen Touareg 2011 не включается ГУ

[Alex_AllatRa]

Прошу помощи, авто Volkswagen Touareg NF, после неудачной попытки прошивки ГУ RNS850, не включается, подскажите куда копать?

 

[Alex_AllatRa]

Здравствуйте подключился к RNS850 через UART согласно этому мануалу

You must be registered for see links

 

[Alex_AllatRa]

ГУ выдало следующий лог

 

[Alex_AllatRa]

IPL: Audi 3G 9308 (SH7785) / QNX 6.3.0 [PL_qnx_ipl-3g_9308-sh7785_08253A, built 2008/06/18_15-16-25_UTC]
CPU: SH7785 (>= 5th cut, clk mode 20. 4xDDR), 792MHz
RAM: 512 MB (probed, DBCONF=e30002)
FLASH: Spansion S29GL512N (32bit): 512 sectors x 256K
FPGA: PL_MMI3G_PLUS_FPGA_9411_D1_11384A (0ms)
*** Old-fashioned mark found on IFS @0x1c0000: .zero=0x3000001a
*** Old-fashioned mark found on IFS @0x680000: .zero=0x10000000
starting image @680000 ...

Startup: PL_qnx_startup-sh7785_11292A, built 2011/07/19_08-03-38_UTC
RAM : 128 MB @0x08000000
RAM : 128 MB @0x40000000
NVRAM: 36 MB @0x5dc00000
RAM : 220 MB @0x50000000
FLASH: 128 MB @0x00000000
FPGA IRQ: Interrupt Controller ID:33 Ver:2.1.0 ILVL:7 Lines:255

System page at phys:0800a000 user:0800a000 kern:8800a000
Starting next program at v8804bae0
Welcome QNX6.3.2 (QNXLabel RL_qnx_os_632_PSP3_08041A)- Harman/Becker MMI3GP Build 9478 C1 D1-16243A
USB-stuff (QNXLabel RL_qnx_os_632_PSP3_08041A)
(devf t1::f3s_table_find:247) fs0p1 corrupt U: 30
Unable to access "/mnt/efs-extended" (2)
Password:NV: Waiting for the minirm init done indication file /dev/shmem/nvminirm.finished'
NVLOADER: Booting DSP (DRAM Setup time = 1000 us)...
NVLOADER: Going to call nvTsrmRawLoad for file /etc/NvDspCodecs.elf
Unable to open file /etc/NvDspCodecs.elf
NVLOADER: Failed to download dsp .raw image
Enabling DMA using channel 11
Overriding default Interrupt Priority
Current debug level = 0x7fffffff
dmaChannel = 11, interrupt thread priority = 21
devg-NVMEM: Mapped vaddr 0x38100000 to paddr 0x5d597000
Mask = c3
GPIO 7 set to Low
[pcidma] PL_qnx_pcidma_FMod08363A_09274A, built 2009/07/02_11-10-37_UTC
multicored [000000006.394]:version 4.6.d, verbosity 1 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOAD
multicored [000000006.396]:using 750 buffers of size 1460 (total 1095000 bytes)
multicored [000000006.435]:version 4.6.d, verbosity 2 (supported 4), scope 0x00000001, console: /dev/ser1 (fd=3), FILE_LOGGING, TESTCONTROL, DYNAMIC_LOAD
multicored [000000006.448]:udp: broadcaster created
dev-irc: t[pintest] Attaching nmi handler to 4096
e[pintest] Attaching pci handler to 8245
r[pintest] Applying NMI patch
msrvstarter error: Spawning child process /usr/bin/startDumper.sh failed! ERRNO=2: 'No such file or directory'
srvstarter error: Spawn process '/usr/bin/startDumper.sh' failed! Error: No such file or directory
srvstarter error: startProcess '/usr/bin/startDumper.sh' failed with EXIT_FAILURE!
inatmulticored [000000006.462]:attached to filesystem at /hbsystem/multicore, port 851
ing with code -1multicored [000000006.471]:MACHINE:SH(1), total MEM 499122176, 1: 271582976 SH7785 (SH4A) 792MHz, FPU

multicored [000000006.474]:can't start dumper thread (ret 4), Interrupted function call
multicored [000000006.474]:sloop active
multicored [000000006.476]:lo0 127.0.0.1 255.0.0.0
multicored [000000006.477]flog0 0.0.0.0 0.0.0.0
multicored [000000006.499]:listener_activate()
multicored [000000006.501]:listener on port 851 active, fd=7
srvstarter error: Spawning child process /lsd/lsd.sh failed! ERRNO=2: 'No such file or directory'
srvstarter error: Spawn process '/lsd/lsd.sh' failed! Error: No such file or directory
srvstarter error: startProcess '/lsd/lsd.sh' failed with EXIT_FAILURE!
dev-nvram: PL_qnx_dev-nvram_07225A, built 2007/06/01_15-44-08_UTC
dev-nvram: page_size:4096
dev-nvram: signalling register 10ee:9411:0:40:40 [vid:did:barffs:mask]
dev-nvram: CPU: SH7785 (5th cut or higher, clk_mode 20) [10300700:250, 133735fa]
dev-nvram: map '/dev/nvram/navi' to 0x5dc00000-0x5fffefff
dev-nvram: map '/dev/nvram/.guard' to 0x5ffff000-0x5fffffff
dev-nvram: SelfRefresh was inactive
UART: Mod:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: UART supports 32bit access
devc-ser8250hb: RX_FIFO_SIZE:2048 TX_FIFO_SIZE:2048
devc-ser8250hb: set IBUF size to 16384
UART: Mod:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: UART supports 32bit access
devc-ser8250hb: RX_FIFO_SIZE:512 TX_FIFO_SIZE:512
UART: Mod:0E Date:09503A Ver:2.2.2
devc-ser8250hb: UART supports FiFo counter
devc-ser8250hb: RX_FIFO_SIZE:32 TX_FIFO_SIZE:32
Debug filehandle = 4
For further debug messages have a look at multicore output consoles '/hbsystem/multicore/navi/g'
[pcidma] PL_qnx_pcidma_FMod08363A_09441A, built 2009/10/26_07-46-16_UTC
/usr/bin/mount_mam0.sh[19]: touch: not found
/usr/bin/mount_mam0.sh[19]: touch: not found
mam0 available
NAVI: sys_alloc_shm_area(/dev/nvram/navi) open() ok: 9
NAVI: sys_alloc_shm_area(/dev/nvram/navi) filesize() = 37744640
NAVI: sys_alloc_shm_area(/dev/nvram/navi) mmap to 38100000
NAVI: sys_alloc_shm_area(/dev/nvram/navi): physical of 38100000 at 5dc00000
[t(p) usr/apps/NavCore 81947 14 10 804700c]
srvstarter error: Spawning child process /usr/bin/manage_cd.sh failed! ERRNO=2: 'No such file or directory'
srvstarter error: Spawn process '/usr/bin/manage_cd.sh' failed! Error: No such file or directory
srvstarter error: startProcess '/usr/bin/manage_cd.sh' failed with EXIT_FAILURE!
Path=0 - XILINX ATAPI
target=0 lun=0 CD-ROM(5) - FJ-TEN DVD-ROM DV-05FT2 Rev: 1B20
Path=1 - XILINX ATAPI
target=1 lun=0 Direct-Access(0) - TOSHIBA MK6050GA Rev: TJ10
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
checkFreeMem: giving up searching for process pids
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
checkPersistence: finished
[t(p) proc/boot/procnto-instr 1 1 0 8807a228]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
multicored [000000046.735]:startup phase ending for 0
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 8807a22e]
[t(p) proc/boot/procnto-instr 1 1 0 88074442]
IP@:

 

[Alex_AllatRa]

кто то сталкиался с QNX? Может что то разеснить?

 

[XxxxxX]

Прошу помощи, авто Volkswagen Touareg NF, после неудачной попытки прошивки ГУ RNS850, не включается, подскажите куда копать?

можно на столе на прямую к жесткому подключиться и накатить прошивку

 

[Alex_AllatRa]

так вроде на жостком диске навигация, а прошивка во флеш-памяти

 

[XxxxxX]

так вроде на жостком диске навигация, а прошивка во флеш-памяти

я на таком туареге менял жесткий на SSD ( подготовка настоле, после устанавливал на машину и накатывал прошивку и навигацию на машине