Need Help: IMMO OFF Request - Land Rover Discovery 3 2.7L TDV6 (Siemens SID201)

[mwisho265]

Hi everyone,
I am trying to perform an IMMO OFF on a Land Rover Discovery 3 2.7L TDV6, and I would really appreciate it if someone could help me modify my original dump file.
I have already successfully read the original firmware file using PCMflash (Module 43) via a Tactrix OpenPort 2.0 interface.
Here are the specific details of the ECU from my identification read:

• Vehicle: Land Rover Discovery 3 2.7L TDV6
• ECU Type: Siemens/Continental SID201
• Protocol: [43] JLR: Discovery 3 2.7L TDV6 (SID201)
• SW Version: 5122079008A0
• Calibration: NNW503161 4223
• Hardware: NNN500560

 

[Alexandr223]

Why are you doing this?

 

[Alexandr223]

There is no immobilizer in the PCM on the Discovery 3.

 

[Alexandr223]

If you want to replace the PCM, you need to reset it to "virgin" state.

 

[Alexandr223]

You will also need a Ktag to load the virgin file; let me know if you need help.

 

[ADAMAS]

SDD в эту машину можно привязать блок даже не делая его вирджин

 

[Alexandr223]

Не привяжете

 

[Alexandr223]

Sid201 с вскрытием ktag, потом только sdd как новый

 

[ADAMAS]

Не привяжете

VIN baypass и вперед, сегодня так на Jaguar xf sid204 привязал